...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

2002 Fender Concert Reverb Pro Series - $675

‹ image 1 of 11 ›
2002 Fender Concert Reverb Pro Series 1
2002 Fender Concert Reverb Pro Series 1 thumbnail2002 Fender Concert Reverb Pro Series 2 thumbnail2002 Fender Concert Reverb Pro Series 3 thumbnail2002 Fender Concert Reverb Pro Series 4 thumbnail2002 Fender Concert Reverb Pro Series 5 thumbnail2002 Fender Concert Reverb Pro Series 6 thumbnail2002 Fender Concert Reverb Pro Series 7 thumbnail2002 Fender Concert Reverb Pro Series 8 thumbnail2002 Fender Concert Reverb Pro Series 9 thumbnail2002 Fender Concert Reverb Pro Series 10 thumbnail2002 Fender Concert Reverb Pro Series 11 thumbnail
condition: excellent
make / manufacturer: Fender
model name / number: Concert Reverb Pro Series

QR Code Link to This Post

2002 Fender Concert Reverb from Fender's professional series. Made in the USA. Sounds phenomenal. Tube-driven reverb and tremolo. Tremolo is the bias-type, giving it a very warm effect. I re-tubed it a couple of years ago, plenty of life. Biased to ~40 mA. Original Eminence-made 10" 50W 8 ohm speakers. I got rid of the original Fender wiring and speaker jack and made a new harness with oxygen-free 14 ga wire, wired in series-parallel to 8 ohms with a Neutrik jack, marine grade shrink tubing at the flex joint and silver-bearing solder. Silver allows electrons to flow more freely than lead and lead alloys. I installed rubber feet on the bottom because I had it stacked on an 8-ohm cabinet. If you think you may do the same, I'll include an external speaker cable with 14 ga oxygen-free wire with the same jack and solder as the internal speaker jack. These things matter. Most of what comes out of factories today is sub-par.

There's a small ding on the top of the amp toward the middle. I did my best to capture it in the photo.

Fender lists the shipping weight of this amp at ~85 lbs. Because of its weight, local pickup only. If you're in the Milwaukee metro area send me a Craigslist message and I can meet you half way.

Included:

Two power cords. These are often universal and can be used in many amps with the same receptacle.

Original footswitch

Patch cord to connect the effects loop. Neutrik/Rean pancake jack with Mogami 2319 wire, marine-grade shrink tubing at the flex joint with silver-bearing solder. I made this specifically for the amp.

Patch cord to connect the footswitch to the amp. Neutrik/Rean pancake jack with Mogami 2319 wire, marine-grade shrink tubing at the flex joint with silver-bearing solder. I made this specifically for the amp.

Two Euro-Tube tube dampers for the 6L6 power tubes. This thing moves a lot of air and the dampers help stabilize the power tubes.

Casters

post id: 7901808003

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.